EN 
DE 
RU 
FR 
PT 
ES 
IT 
JA 
Overweight laminated glass handling
H-Type Glass Vacuum Lifter for overweight laminated, bulletproof, and fire-rated glass. GLClamp covers 800 kg and 1200 kg jobs with a crane-suspended frame or short floor transfer on braked universal wheels.
When a single 2.0×3.0×19 mm sheet already weighs about 285 kg, and a double-layer 19 mm laminated build can climb above 570 kg, the job stops being a hand-carry problem and becomes a below-the-hook lifting problem. Bulletproof glass, fire-rated ceramic laminated glass, and SentryGlas laminated panels do not forgive edge knocks, uneven suction, or poor balance.
That is where GLClamp’s H-type glass vacuum lifter fits. It is built for crane suspended transfer in the workshop, but it can also roll on braked universal wheels for short floor moves inside the same line. Instead of forcing workers to fight the load, the frame spreads the weight across multiple vacuum pads and keeps the panel positioned for loading, turning, and final set-down.
Why handheld cups and small lifters fail on heavy laminated stacks
Manual carrying and handheld vacuum cups work only until the panel size, thickness, and stack height move out of the comfort zone. At hundreds of kilos, the load is no longer just heavy; it is unstable, awkward to rotate, and expensive to damage. A strap sling can scratch the surface or leave the panel hard to control. A small suction trolley can help on short moves, but it does not solve overhead positioning or repeated alignment at the glazing point.
For these panels, the real risk is not only dropping the sheet. It is the chain reaction of slow positioning, edge chipping, and extra labor around each lift. That is why a below-the-hook vacuum lifter with a wide H-frame becomes the practical option.
Why the GLClamp H-frame matches oversized glass handling
GLClamp is offered in 800 kg and 1200 kg versions, so the operator can match the lifter to a single heavy sheet or a full transfer stack. The wide H-frame spreads the load, and the 12–24 vacuum pad layout helps distribute force instead of concentrating it at a few contact points. That matters when the panel is laminated, fire-rated, or part of a heavy production stack that must stay flat during travel.
The pad positions are adjustable, and the single-side extension can reach 800–1500 mm on the wider builds, so the same frame can be set up for different panel widths without changing the whole handling method. In traffic-profile language, this is a glass handling vacuum lifter with telescopic extension logic, multiple vacuum pads, and load positioning support. Add remote control, battery powered operation, power-off vacuum holding, audio-visual alarm, and a sealed control package with a Thomas vacuum pump and Panasonic vacuum pressure switch, and the operator gets a lifting tool that is easier to trust on long, expensive glass.
What the images show: factory lift, warehouse transfer, and curtain wall set-down
The first image shows the machine in a factory setting, with the multi-cup steel frame and top lifting mast visible. The panel is controlled from the frame itself, which is what you want when the sheet is too large for hand guidance. The second image shows the same lifting logic during warehouse transfer, where a chain hoist handles the overhead movement and the load can still be managed on short floor travel. The third image shows curtain wall installation, proving the same H-type glass vacuum lifter can move from workshop handling to facade glazing without changing the basic load-spreading principle.
Those scenes are the reason this design is not a generic vacuum cup. It is a glass vacuum lifter for glass storage rack pickup, rack-to-line transfer, glass processing station loading, indoor glass movement, and large outdoor facade glass installation. The job changes, but the combination of wide frame, distributed pads, and secure vacuum hold stays the same.
What to specify before you choose a unit
- Panel weight and footprint: use 800 kg or 1200 kg capacity so the frame matches the actual load, not the guessed load.
- Move route: choose crane suspended handling for overhead lifting, or braked universal wheels when the panel must roll short distances inside the line.
- Glass type: confirm flat glass, laminated glass, tempered glass, IGU, or special heavy laminated builds so suction cup layout and pad spacing can be set correctly.
- Safety requirement: ask for power-off vacuum holding, pressure monitoring, and alarm logic if the panel must stay suspended while the line pauses.