EN 
DE 
RU 
FR 
PT 
ES 
IT 
JA H-Type Motorized Glass Vacuum Lifter
GLClamp for lifting, turning and positioning large flat glass panels.
Send Panel Size & Weight
Built Around the Glass Panel You Need to Move
GLClamp combines a wide H-frame, multiple vacuum pads, an overhead suspension point and a motorized handling mechanism. It is intended for glass factories and installation teams moving large flat panels between racks, processing stations and positioning points. The final capacity and pad layout must be selected against the actual panel dimensions, weight, surface condition, lifting interface and site requirements.
What We Need to Confirm Your GLClamp Configuration
Send the real panel and site data first. We will then confirm the suitable frame, pad arrangement and powered movement configuration.
| Selection input | What to provide | Why it matters |
|---|---|---|
| Glass size | Maximum length and width | Determines frame span and pad placement |
| Panel weight | Maximum weight per sheet or assembly | Required for capacity selection |
| Glass surface | Flatness, coating and surface condition | Confirms vacuum pad compatibility |
| Required movement | Lift, turn, tilt and final orientation | Defines the powered handling functions |
| Lifting interface | Crane or hoist type and hook connection | Confirms suspension and operating clearance |
| Site conditions | Indoor or outdoor use, power standard and working height | Supports electrical and control configuration |
| Order details | Quantity, destination port and target date | Supports the commercial quotation |
Need the Correct Unit, Not a Generic Model Number?
Share one panel drawing or a simple size-and-weight list. Our team will review the handling direction, available lifting equipment and operating space before confirming a configuration.
- Panel size and weight review
- Vacuum pad layout confirmation
- Crane or hoist interface check
From Vacuum Pickup to Controlled Positioning
The exact operating procedure must follow the supplied equipment instructions and the site's lifting plan.
Check the Panel and Setup
Confirm the panel weight, surface condition, pad contact area, lifting connection and available clearance before pickup.
Establish and Verify Vacuum
Position the H-frame on the panel, establish vacuum and verify the equipment indicators before the load leaves its support.
Lift, Turn and Position
Use the crane or hoist together with the motorized mechanism to move the glass into the required orientation, then release only after the panel is fully supported.
Where the H-Type Vacuum Lifter Fits
Use cases shown below are configuration-dependent and must be checked against the actual glass and lifting plan.
Rack-to-Line Transfer
Move large flat glass from storage positions toward processing or staging areas.
Processing Station Loading
Position panels above transfer tables or other factory handling stations.
Controlled Orientation
Support turning and final positioning where overhead handling equipment is available.
GLClamp H-Type Layout and Controls
The photographs show the product family and handling arrangement. Final supplied details are confirmed in the quotation.
Wide H-Frame with Multiple Vacuum Pads
The H-layout spreads vacuum contact points across the panel. Frame span and pad placement are selected to suit the sheet dimensions and weight distribution.
Integrated Motorized Mechanism and Control Cabinet
The equipment family includes an integrated drive, control cabinet and monitoring interface for controlled glass movement. Required movement functions and site power must be confirmed before manufacture.
Request a Factory-Direct Price Quote
Get customized CAD drawings, dynamic loading calculations, and wholesale price quotes. Response within 12 hours.