L-Shape Glass Storage Rack for Warehouse and Jobsite Handling
For warehouse organization, glass fabrication shops, and jobsite handling, Grack keeps fixed-size sheet glass upright, lowers tipping risk, protects contact surfaces, and makes empty return flow easier to control.
Request Quote
Product Introduction
Grack is an L-shape glass storage rack for B2B glass handling where upright sheet glass must stay stable through warehouse storage, factory transfer, truck delivery, and jobsite unloading. It replaces loose stacking and makes the loading angle, contact surface, and return flow easier to control.
Key Specifications for Daily Operations
Use the specs below to check fit for glass fabrication shops, warehouse transfer, and export packing.
| Item | Typical value |
|---|---|
| Product type | L-shape glass storage rack |
| Primary use | Warehouse glass organization, factory internal logistics, jobsite glass handling |
| Safe loading angle | 85–87° rear lean for stable sheet support |
| Forklift access | 4-way forklift entry on the base |
| Lifting points | 4 top lifting pins for crane handling |
| Base structure | 100 × 50 mm heavy-duty rectangular tube on typical configurations |
| Wall thickness | 2.5–3.0 mm heavy-duty build range |
| Surface finish | Powder coating finish |
| Glass contact protection | Rubber pads / EPDM lining to reduce scratch risk |
| Return strategy | Nestable stacking for lower empty return cost |
| Export fit | Standard configurations optimized around 1600 mm container width |
| Static capacity | Up to 4 tonnes in heavy-duty configurations |

Need a rack for warehouse, factory, or jobsite?
Tell us your glass size, handling flow, and return strategy. We can match the rack to your loading angle, lifting method, and storage layout.
- Match the rack to your sheet size and footprint
- Check forklift, crane, and truck handling fit
- Plan nesting density for return logistics
Built for Stable Handling and Lower Return Cost
The design supports day-to-day storage, transport, and site delivery without forcing you to change the way glass moves through the plant.
Nesting design cuts empty return volume
When racks come back empty, nesting lets you stack them tightly for depot storage, truck delivery, or 40HQ loading. That reduces dead space and lowers reverse logistics cost without changing the working footprint in use.

Stable load control for shop floor and jobsite
The rack keeps sheet glass at a controlled rear lean, with forklift pockets, lifting pins, and strap-ready structure to support safer transfer from fabrication shop to truck and then to site. That helps protect the glass from tipping, rubbing, and transport shock.

Request the dimension sheet
Send glass size, quantity, and handling method to confirm the right rack layout, load angle, and container fit.
Get packing and return guidance
We can also advise on nesting count, export packing density, and return flow for warehouse or project deliveries.
Ready to fit this rack to your flow?
Share your glass size, storage location, and delivery route. We will match the rack to the use case before you buy.