This project required a welded carbon steel glass storage rack that could hold finished glass safely, protect edges during repeated handling, and fit a clear transport plan for 100 units on a 9.6 meter flatbed truck.

Load capacity per rack
Rack outer size
9.6 m flatbed loading plan
The rack body uses carbon steel sections with a stable fully welded structure. According to the project document, the standard material set includes Q235 carbon steel, 50 × 25 × 2.0 mm C-channel, 50 × 50 square tube, and 180 × 80 × 2.5 mm rectangular tube.
The contact protection part uses a removable I-shaped rubber strip matched with the C-channel, so the customer can replace or service the protection layer without damaging the rack body. This directly reduces scratch risk when handling finished glass sheets.
The customer needed one rack format that combined secure glass storage, repeatable internal handling, and transport efficiency. The solution had to support roughly 46 kg rack self-weight, carry 750 kg of product load, and still follow a practical stack and truck loading method for export or regional delivery.
How the Grack solution was configured
Stable welded frame
The rack body uses a full penetration welded steel structure to improve rigidity during storage and movement. This is important for fixed-size finished glass that cannot tolerate twist or sudden rack deformation.
Scratch control at contact points
The removable rubber profile creates a protected glass contact surface and helps prevent direct steel-to-glass abrasion. It also makes maintenance easier than permanent bonded protection parts.
Transport-ready stack design
The proposal includes a defined stacking and truck loading method, not just a rack drawing. That gives the customer a clear path from fabrication to packaged outbound shipment.

Packaging proof from the project document
The approved packaging method stacks 8 racks together, wraps the bundle with stretch film, and secures it with strapping. The stacked package size is recorded as 1200 × 1550 × 2280 mm, giving the customer a concrete packing reference before dispatch planning.
Technical specification summary
| Item | Project value |
|---|---|
| Product name | Grack glass storage rack |
| Outer size | 1200 × 900 × 1200 mm |
| Storage space | 800 × 945 mm |
| Load capacity | 750 kg |
Execution points that matter for this project
- Surface finish is electrostatic powder coating in blue, with finish customization available if the operating environment changes.
- Logo treatment can remain unprinted as requested, which is useful for private-label supply or distributor delivery.
- Truck loading logic must be followed exactly to achieve the documented 100-unit load plan on a 9.6 meter flatbed.
Engineering note: The project document records a loading scheme with two rows across the truck width and alternating orientation along the truck length, producing 96 units from six 16-piece stacks plus 4 additional units at the head position, for a total of 100 racks.
Project image sequence

Single wrapped racks are placed upside down on top of the main stacked bundle until the shipment quantity reaches 16 units per complete pile.

The transport plan shows how the rack stacks are arranged on the 9.6 meter flatbed to reach the target quantity without losing loading logic.

The sample drawing supports structure confirmation before mass production and helps align dimensions, material sections, and protection details.