WhatsApp Telegram
CONTACT
COMPACT IGU HARP RACK · PROJECT 12188

Compact IGU Glass Harp Rack with 60 Slots and KD Flat-Pack Shipping

Need a glass harp rack but have limited workshop space? The 12188 project records a compact Hrack at 1310 × 600 × 1220 mm with 60 slots, a 14.3 mm slot width that can be customized, 5-inch casters, and knock-down packaging of just 0.32 cbm. It is a practical starting point for small IGU fabricators ordering from 5 sets.

Tell Us Your Space
3D render comparing assembled blue glass harp rack with its knock down flat pack components.

A smaller footprint for small-batch IGU work

A small glass fabricator does not always need a full-size storage system. This compact glass harp rack is intended for separating and holding glass during cutting, processing, IGU pairing, and short-distance workshop transfer. The 12188 dimensions are a project-recorded configuration, not a universal standard: the final rack should be checked against your largest glass size, thickness range, loading plan, aisle width, and floor conditions before order confirmation.

PROJECT PARAMETERS

12188 compact Hrack specification

The figures below are the recorded parameters for this small IGU harp rack project. They answer the three practical questions most small workshops ask first: does it fit, how many slots does it provide, and how much space does the shipment take?

Swipe to view all parameters on mobile
Item12188 project recordOrdering note
Overall dimensions1310 × 600 × 1220 mmConfirm glass size and aisle clearance before finalizing.
Slot quantity60 slotsProject-specific capacity; do not treat as a universal Hrack standard.
Slot width14.3 mm, customizableMatch the slot design to your actual glass thickness range.
Main material1.2 × 40 tubeRecorded in the 12188 project material description.
Mobility5-inch castersUse and floor conditions should be reviewed for the intended loaded movement.
PackagingKnock-down flat-pack; 141 × 114 × 20 cmDisassembled packing supports more compact export logistics.
Packed volume / weight0.32 cbm / 88.2 kgUse these project-recorded figures for preliminary freight planning.
Minimum order quantity5 setsRecorded MOQ for this project.
Recorded priceCNY 3,000 per set, tax includedConfirm current quotation, destination, and commercial terms with GSR.
3D front close-up rendering of a blue glass harp rack's bottom slot numbering index board.

Will 60 slots work for your line?

Send the glass dimensions and thicknesses you actually run. We can check whether the 1310 × 600 × 1220 mm footprint and 14.3 mm project slot layout are suitable, or whether a different compact configuration is safer.

  • Small-footprint layout for space-limited workshops
  • 60 project-recorded slots with customizable slot width
  • Preliminary freight reference: 0.32 cbm and 88.2 kg packed
Check My Glass Sizes
WORKSHOP HANDLING

Separate glass without filling the workshop

The compact format is most useful when the rack is treated as a WIP sorting and buffering point—not as a replacement for every heavy-duty storage rack.

Protected slot separation for IGU components

The harp layout keeps individual sheets separated while they wait for the next process. The standard Hrack design language uses steel-wire dividers with PVC sleeves and a cushioned rear contact surface, helping avoid direct glass-to-steel contact during routine placement. For this 12188 project, the 14.3 mm slot width is a recorded, customizable value; verify it against your real glass thickness and handling method. This is a good fit for small-batch sorting, pairing, and short-term WIP buffering. It is not a substitute for a confirmed load calculation or a safety review for oversized, unusually heavy, or damaged glass.

3D cross section of a glass harp divider wire with inner steel core and outer PVC sleeve.

KD packaging that matches a five-set starting order

A knock-down configuration separates the frame and related components for flat-pack shipment instead of sending the rack as a fully assembled volume. In the 12188 record, the package is 141 × 114 × 20 cm, approximately 0.32 cbm, and 88.2 kg. That makes the compact rack easier to plan for small export batches, but freight and container calculations still depend on the final packing method and shipment terms. Assembly, floor access, aisle width, and loaded movement should be confirmed before production.

3D rendering of the flat pack knock down packaging layout for a blue industrial glass sorting harp rack.

Best suited for

Small and medium IGU fabricators, low-volume or mixed-order production, compact workshops, and teams that need a mobile sorting point between cutting, processing, and assembly. The 5-set MOQ is the recorded starting quantity for the 12188 project.

Confirm before ordering

Share maximum and minimum glass dimensions, thickness range, expected sheets per rack, required slot width, movement frequency, floor condition, aisle clearance, and destination. We will confirm whether this compact project configuration fits or recommend a different size.

Only need a few compact glass harp racks?

Tell us your workshop space, glass sizes, thickness range, and required quantity. We will return a small IGU glass harp rack list with the suitable slot layout, packing reference, and quotation basis.

Send Space and Glass Details
Email
get a quote
whatsapp