WhatsApp Telegram
CONTACT
Carey Glass handling case

Carey Glass Glass Storage Rack Solution: Mgrack Double-Sided A-Frame

Carey Glass is one of Europe’s largest independent single-sheet glass deep-processing companies, so the real challenge is not storage alone. It is keeping fragile panels safe during staging, internal transfer, and outbound loading while avoiding the freight waste of fixed welded racks. Mgrack solves that with a double-sided A-frame structure, protected contact points, caster mobility, and knock-down shipping.

Forklift moving a wheeled double-sided steel glass storage rack with vertical panels in factory
2,000-3,600 kg
Typical load range
90-144 sets
40HQ loading range
KD / bolt-on
Knock-down shipping format

Carey Glass works at high volume, with glass moving constantly between processing, inspection, staging, and dispatch. In that environment, a fixed rack is not efficient enough: it blocks floor space when empty, costs too much to return, and makes handling more difficult than it needs to be.

Mgrack was chosen because it addresses those losses in one system. It keeps panels upright and separated, gives operators a mobile base for plant-floor transfer, and uses a knock-down structure so empty racks can be nested tightly instead of shipping as wasted air.

The old setup created three recurring losses

Traditional welded racks are expensive to send back, hard to reposition inside a busy plant, and too exposed at the contact points when fragile panels are loaded or unloaded repeatedly. For a glass processor like Carey Glass, that becomes a direct cost in freight, breakage risk, and handling time.

Why Mgrack fits the Carey Glass workflow

Double-sided A-frame load path

The symmetric triangular frame keeps the center of gravity stable while storing glass upright on both sides. That is the safest geometry for fragile sheet material that must stay separated and easy to access.

Protected contact points and secure locking

Rubber padding, limit rods, and ratchet strap fixing keep steel away from the glass edge and prevent movement during pushing, forklift transfer, or short internal transport.

Knock-down shipping economics

The bolt-on frame can be disassembled, nested, and stacked for shipment. That is what turns the rack from a freight burden into a logistics asset when empty racks need to move back and forth.

Nested blue powder-coated steel A-frame storage racks in KD shipping configuration for glass panels

KD nesting proves the freight advantage

The proof image shows the empty-rack nesting state: bases and frames stack tightly instead of traveling as full-volume welded units. For Carey Glass, that means lower return freight, better container use, and less dead space in outbound logistics.

Core technical parameters

ParameterSpecification
Frame materialQ235A carbon steel with bolted A-frame structure
Load rangeTypically 1,000-3,600 kg depending on tube size, caster set, and layout
Surface finishElectrostatic powder coating for corrosion resistance
Handling interfacesSwivel casters, forklift passages, top lifting lugs, and bolt-on KD modules

What must be confirmed before ordering

  • The exact panel size and single-side storage depth must match the customer’s glass dimensions.
  • The plant floor should be reasonably flat if the loaded rack will be pushed on casters.
  • Because the product ships in knock-down form, on-site bolting is required; if perfect cosmetics matter, wood crate packaging should be requested instead of standard wrap-and-strap packing.

Final result: For Carey Glass, Mgrack combines safe upright handling, plant-floor mobility, and compact empty-rack nesting into one operating model. The result is less breakage risk, easier daily movement, and lower freight cost every time the racks leave or return.

Talk to GSR about your Carey Glass layout

Email
get a quote
whatsapp