EN 
DE 
RU 
FR 
PT 
ES 
IT 
JA 
Glass rack loading | Vacuum glass sucker carrier
A Vacuum glass sucker carrier linked with a GRACK A-frame glass rack can turn crowded flat-glass storage into a shorter, more controlled route from upright storage to the loading station.
Large glass sheets are difficult to manage when storage and production are planned as separate activities. Flat sheets placed on the floor occupy aisles and working space. Sheets stored vertically without a controlled support system can lean, shift, or become difficult to retrieve safely. In both cases, the route between the warehouse and the machine becomes a sequence of manual glass handling, temporary staging, and repeated repositioning.
For a glass processor handling large panels, the practical target is not simply faster lifting. It is a shorter material-handling route with fewer transfers. The combination of a GRACK A-frame glass storage rack and a Vsfeeder Vacuum glass sucker carrier creates that link: glass is stored upright in a defined position, then picked near the production area and delivered directly to the loading point for glass sheet handling or machine feeding.
Why flat storage creates a second-handling problem
Manual A-frame loading and floor-based staging often force operators to make extra moves before the sheet reaches a laser cutting machine, glass tempering line, insulating glass line, or another processing station. Forklift glass handling may need clear access on several sides, while a crane with sling can require additional rigging and careful release. Each extra transfer increases the opportunity for a corner impact, a scratch, or an unsafe reach beside a heavy sheet. GRACK addresses the storage side by keeping panels upright and organized rather than spread across the floor. Vsfeeder addresses the next step with vacuum lifting: the suction cup frame engages the panel at the rack-side pick position and supports a controlled move toward the machine.
Why the Vsfeeder fits a rack-to-machine route
The Vsfeeder is a column-mounted jib crane vacuum lifter rather than a standalone hand suction tool. Its column and jib arm define a repeatable working envelope beside the storage or processing station, while the electric hoist or configured lifting mechanism provides the vertical movement. The H-frame suction cup arrangement spreads contact over the panel instead of relying on a single lifting point. Vacuum suction then supports pick and place, loading and unloading, and direct glass loading with less manual carrying. The compact footprint of a column mounted vacuum lifter is useful where a full gantry would consume more floor area, and the jib arm can be positioned around the rack and machine interface according to the site layout.
Configuration must follow the actual panel size, surface condition, weight, and lifting direction. The image evidence shows different project configurations, including a frame marked MAX=300KG and a workshop setup with a 0.5t electric hoist. These are configuration evidence, not a blanket rating for every Vsfeeder. The final design should confirm load capacity, suction-cup quantity and spacing, vacuum pressure monitoring, safety valve arrangement, rotation requirement, and the available column height and arm reach.
What the images show about the handling point
The lifting frame is the critical interface between the machine and the glass. The workshop evidence shows a multi-cup frame, central lifting connection, hoses, and a large panel being moved as one supported load. A separate close-up shows the vacuum suction cup assembly with an aluminum mounting plate, threaded center connector, and rubber sealing ring. Those details matter because a glass lifter must maintain contact across the panel surface while avoiding unnecessary contact with the finished face. The column, swivel jib arm, and control system then determine how the supported sheet travels from the GRACK position to the loading station.
At the workstation, the benefit is operational: a trained operator can use vacuum pick and place instead of carrying the sheet by hand. This supports labor saving glass loading, reduces manual handling, and helps reduce glass breakage and scratches caused by repeated transfers. The rack remains the storage solution; the Vsfeeder remains the lifting and loading solution. Keeping those roles distinct makes the integrated design easier to specify and evaluate.
Specification points for an integrated storage and loading layout
- Define the rack-to-machine path first: the GRACK pickup position, the jib arm sweep, the machine loading edge, and the required 270° or 360° rotation should be checked together rather than separately.
- Match the H-frame suction cup layout to the glass dimensions, weight distribution, surface condition, and lifting orientation; do not select a six-cup or Φ200 cup arrangement without confirming the actual panel and vacuum conditions.
- Use project evidence correctly: a frame marked MAX=300KG describes that shown lifting frame, while load capacity for the complete order must be confirmed against the selected frame, hoist, vacuum circuit, and safety factor.
- Keep inspection points visible, including vacuum pressure indication, hose condition, cup sealing surfaces, safety-valve function, and the operator control position before continuous loading begins.