EN 
DE 
RU 
FR 
PT 
ES 
IT 
JA 
Mfence Pallet Fence | Q235 Steel Pallet Collar
Q235 steel pallet collar turns a pallet lane from hand-wrapped, strap-dependent handling into a stackable unit load that crews can build in seconds and move with a forklift.
In many warehouses, the problem is not storage capacity. It is the time lost every time a pallet has to be wrapped by hand, strapped again, checked again, and moved again. When the load is loose, operators slow down to keep the film tight, the strapping sequence becomes another manual step, and the forklift has to wait for a safer handoff. That is exactly where a Q235 steel pallet collar changes the workflow.
Mfence is built for that kind of lane. It creates a rigid pallet fence around the load, so the pallet becomes a reusable unit instead of a bundle of film and tape. The result is faster assembly, cleaner handling, and a load that is ready for standard forklift movement instead of extra wrapping before every move.
Why a Q235 steel pallet collar fits this workflow
The job here is simple: contain the load, shorten assembly time, and keep the pallet compatible with normal warehouse handling. Mfence does that with a tool-free clip assembly, a bottomless design that sits on a pallet, and four-way fork entry for standard forklift work. That combination matters when the same unit has to move from packing to staging to shipping without being rebuilt each time.
The traffic profile for Mfence points to the same logic. A wire mesh pallet collar is the right category when the load needs loose-material containment, drum storage, returnable packaging, and racking-compatible storage. If your current process still depends on stretch wrap or banding, the product is designed to replace that disposable layer with a reusable metal structure.
Structure evidence from the product itself
The product is not just a frame around a pallet. The structure uses welded wire mesh, Q235 steel, a rectangular 40×40 tube frame, and 4 mm wire diameter with 100×100 mesh spacing. Those are the kinds of details that support real warehouse use, because they give the panel enough rigidity for daily handling while still keeping visibility and airflow for stored goods.
The design also includes stacking feet, double hinge construction with staggered inner and outer hinge positions, a half-opening door at about 400 mm, and a forklift entry limit block. In practical terms, that means operators can access goods faster, stack the units more safely, and keep the product aligned with pallet truck and forklift routines instead of fighting them.
Mfence is also described in the traffic profile as a 1100×1100 pallet collar with 1000 mm effective height, a folded size of 2300×1100×140 mm, a self weight of 47–48 kg, and two-layer stackability. It can be hot dip galvanized or finished with a powder coat depending on the target environment. Those are the facts that matter when the buyer needs a reusable unit load for indoor or outdoor storage, production line buffer, WIP storage, or export packaging.
What changes after the switch
Once the pallet is turned into a pallet collar unit, the handling logic changes. There is no need to keep tightening film, rechecking straps, or rebuilding the load every time it moves. The crew can clip the frame into place, load the goods, and send the whole unit by forklift. That saves labor at the packing station and reduces the empty-return volume when the load comes back folded.
This is also where the space-saving side becomes visible. A foldable pallet collar can be collapsed when empty, stacked for return, and reused across many cycles. In a warehouse that handles loose bulk storage, drum storage, or line-side parts feeding, that means less clutter on the floor, less dead time in the packing area, and less disposable material going into the waste stream.
What to confirm before you spec a pallet collar
- Confirm the pallet size and target stack height. Mfence is built around a 1100×1100 pallet collar format with a 1000 mm effective height and two-layer stackable use.
- Confirm the loading and access method. The half-opening door and tool-free clip assembly are there to speed up pick and pack work without extra tools.
- Confirm the return route. The fold-flat structure and 2300×1100×140 mm folded size are what reduce empty-return volume and help returnable packaging work better.
- Confirm forklift compatibility. The bottomless design, stacking feet, forklift entry limit, and four-way fork entry keep the unit aligned with normal pallet handling.