Hird already knows the premium end of the glass handling market. The harder question is what to do with the jobs that do not deserve a flagship machine. A first-floor replacement, a standard curtain wall panel, a rough early-stage site, a school entrance, a bank lobby, a data centre fit-out: these are the jobs that fill a hire calendar. If the machine is too expensive to send, the quote loses. If the machine is too basic, the crew loses the afternoon. Gstruck sits in the middle. It is a glazing robot built to move real glass with controlled vacuum, a rigid chassis, and enough reach to finish the placement without turning the last step into a wrestling match.
The jobs that eat hire margin
Rental fleets do not make money from a machine that only looks good in a brochure. They make money when one unit can go out on Monday, handle a storefront on Tuesday, and still be trusted for a curtain wall panel on Friday. That means the machine has to cover more than one kind of call. Gstruck is built for that middle lane. It can lift, transport, rotate, and present large glass sheets without dragging a three-man crew into every move. For a fleet like Hird, that matters more than a glossy spec sheet. It is the difference between a unit that stays busy and a unit that gets reserved only when the job is perfect.
A stiff chassis changes the day
On paper, people love to talk about lift height and vacuum numbers. In the field, the first thing that matters is whether the machine stays calm when the floor is not perfect. Gstruck is built on Q235A industrial structural steel with full welding. That sounds plain, but it is exactly what a rental fleet wants when a machine will be loaded, unloaded, and sent back out again and again. Less flex means less drama during positioning. The front end adds a 100 mm lateral shift, so the operator can make fine side adjustments without swinging the whole chassis around just to hit the last slot. Add 360° rotation, ±90° forward and backward tilt, and up to 150° of side rotation, and the machine stops feeling like a cart and starts acting like a proper glass installation robot.

Vacuum hold is the part that matters when the job goes wrong
Glazing robot price is easy to compare. Vacuum hold is harder to fake. Gstruck uses a vacuum system built around 300 mm silicone suction cups, usually 4 to 10 depending on the model, and the operating vacuum sits in the -60 kPa to -80 kPa range when the load is properly secured. That is the number crews care about when the panel is already in the air and the wall opening is waiting. The product brief also points to more than 2 hours of vacuum hold in a power-loss situation, which gives the team room to lower the glass safely instead of rushing the whole move. This is the kind of detail a hire fleet can explain to a client without crossing its fingers.

Which Gstruck model fits which hire call
Not every job needs the same machine. That is where the range matters.
- GL-LD-400 carries 400 kg in the retracted position and 200 kg when fully extended. It is the cleaner fit for storefront glass, standard window work, and jobs where access is tight.
- GL-LD-800plus is the one for rougher sites. It lifts 800 kg retracted and 200 kg extended, reaches 5 m, and uses 480 mm pneumatic wheels that handle uneven ground better than small hard wheels.
- GL-HD-1000 steps up for heavier panels, with a 1000 kg capacity for the jobs that simply do not belong on a lighter unit.
That spread gives a hire company room to match the machine to the call instead of forcing every customer into the same box. The machine does not need to be everything. It just needs to be the right one often enough to stay on the book.

What Hird’s clients are really buying
Hird’s clients are not buying a machine for the sake of owning a machine. They are buying cleaner handoffs, steadier final placement, and a way to keep the glass under control when the panel has to go into the wall, not just off the truck. They are buying a robot that can go from workshop test, to rough-site delivery, to actual curtain wall placement without needing a different operator every time. They are also buying a more honest answer to the question behind every hire order: can this machine do the job without wasting the crew’s afternoon?
That is why a mid-market glazing robot makes sense. Premium units have their place. But a fleet only stays profitable when it can cover the ordinary jobs too. Gstruck gives that middle band a real option. If you want to know whether GL-LD-400, GL-LD-800plus, or GL-HD-1000 belongs in your rental matrix, send the panel size range, access width, floor condition, and lift height. That is enough to sort the job properly.
