EN 
DE 
RU 
FR 
PT 
ES 
IT 
JA 
IGU unloading · insulating glass production line · green-state sealant handling
A Double-Sided Glass Gripper keeps two lites supported from both faces during green-state IGU unloading, curing-rack transfer, and upright in-plant handling—reducing the single-side pull that can disturb an uncured sealant joint.
On an insulating glass production line, the most sensitive move may begin after the visible production work is finished. The unit has been sealed, but the secondary sealant is still in its green state. It may need to leave the sealing table, move into a curing rack, or shift to a temporary staging position before packaging. During this interval, a small relative movement between the two lites can change the seal geometry, disturb the spacer relationship, and put the intended gas barrier at risk.
Many plants therefore keep sealed units undisturbed until the sealant has cured—often around 48 hours under their own process rules. The problem is that production flow cannot always wait. A Glass Vacuum Lifter must move the unit without turning a necessary IGU unloading or glass storage rack loading operation into a new source of seam stress.
Why single-side suction is the wrong load path in the green state
A conventional Glass Suction Cup Lifter, handheld vacuum cup, sling, or manual carrying crew may hold the visible pane, but a single-side contact point does not share the load equally between the two lites. As the suspended unit moves, its weight and acceleration can pull one face away from the other. That creates a bending moment through the spacer and the uncured secondary seal. Vibration from a crane or a sudden correction by an operator adds another disturbance. The result may not be visible at the lift itself; it can appear later as uneven sealing, rework, or a gas-retention problem.
Why a double-sided clamp matches the IGU geometry
The GVLC configuration uses Double-Sided Clamping: the vacuum contact is arranged to engage both sides of the unit instead of asking one lite to carry the whole suspended load. That is the key difference between a Double-Sided Glass Gripper and a single-side vacuum clamp. When the two faces are supported together, the handling force is distributed across the panel rather than concentrated at one surface. The operating objective is straightforward—keep the lites aligned while the crane-mounted attachment performs vertical handling, workshop in-plant transfer, and placement into a curing or storage position.
The distributed cup array also matters on large panels. Cup quantity and placement are selected against the panel dimensions, weight, surface condition, and lifting route, so the suction force can be spread instead of concentrated in a small area. Remote Control Operation lets the operator complete the sequence from a controlled position. Automatic Pressure Compensation is intended to restore vacuum when pressure drops below the operating threshold, while the Safety Indicator Light gives a visible vacuum-ready check before the lift. These functions do not replace a lift plan or inspection; they make the intended handling sequence easier to repeat.
What the structure shows—and what to verify before lift
The product image shows the compact equipment layout: a rigid yellow lifting beam, adjustable suction assemblies, an integrated control box, and support legs for placement when the attachment is not suspended. The workshop image shows the same type of crane-mounted arrangement working beside a roller line, with operators guiding a large panel rather than carrying its weight by hand. This is useful evidence of the application and contact layout, but it is not a substitute for a project drawing.
Green-state IGU handling checks tied to the equipment
- Define the route first: specify sealing-table down-loading, curing-rack placement, temporary staging, and any glass storage rack loading or unloading so the crane-mounted, upright handling path is designed around the real clearance and turning points.
- Keep both lites in the load path: use the Double-Sided Glass Gripper rather than relying on single-side suction or a loose sling, and match cup quantity and spacing to the approved unit size and working load.
- Make vacuum status visible: verify the pressure gauge and Safety Indicator Light before raising the unit, then use Automatic Pressure Compensation as a control aid—not as permission to skip cup, hose, seal, and surface checks.
- Release without dragging: the built-in air compressor supports quick release when the unit is seated. Place the IGU into its defined curing or upright storage position; do not pull the still-green unit across a rack or floor.