EN 
DE 
RU 
FR 
PT 
ES 
IT 
JA Glass rack pickup · curtain wall installation · power-loss protection
360 degree rotating glass lifter built for rack-to-workstation moves and high-rise glazing, where a sudden power cut can turn one heavy pane into scrap.
When a pane leaves the A-frame rack, the real risk is no longer only weight. It is the moment the vacuum line, pump, or power supply fails while the glass is suspended. In that gap, a heavy sheet can fall, break, and injure the crew. That is why glass panel handling in a plant or on a facade needs more than a simple lifting aid.
Manual carrying, handheld vacuum cups, slings, straps, a vacuum suction cart, or a forklift with attachments all help when the move is short and controlled. They fall short when the job needs load positioning, rotation, and a real hold after power loss. GLClamp is a below-the-hook vacuum lifter built for that exact failure mode.
What the rack-to-workstation move actually needs
From glass storage rack pickup to A-frame rack to workstation transfer, the equipment has to keep the pane flat, readable, and under control. The first image shows the core logic: a wide H-frame, multiple vacuum pads, a central control cabinet, and a pressure gauge that tells the operator whether suction is stable before the pane leaves the rack. That is not decoration. It is the difference between blind lifting and measured lifting.
GLClamp uses the same logic in production: adjustable pad position for different panel sizes, remote control for the operator, and 360 degree rotation with 90 degree tilt for orientation work. For indoor glass movement and glass processing station loading, that combination reduces re-handling and the number of helpers standing around the load.
Why GLClamp is built for power-loss risk
The lift family covers 800 kg and 1200 kg classes, so the system can match the job instead of being overspecified or undersized. The suction side uses multiple vacuum pads, including 300 mm suction cup options and 100 kg per cup layouts, while the drive package supports battery powered operation on DC24V or DC12V. In practice, that means the unit is not tied to one fixed bay or one narrow workflow.
More important is the hold logic. Power-off vacuum holding stays active for at least 2 hours, far beyond the few minutes many crews expect from a simple single-circuit lifter. Auto pressure supply, a non-return valve, a Panasonic vacuum pressure switch, and audio-visual alarm protection help the operator see a problem before it becomes a drop. A Thomas vacuum pump keeps suction stable, while silicone gel suction cups, sealed component covers, pin-hole pad adjustment, and a wired remote handle make the unit easier to use and easier to keep in service.
What the site photo proves in real work
The installation photo shows the same machine in the environment that matters: curtain wall installation and high-rise glazing. Workers are not wrestling the pane by hand; they are guiding it while the lifter carries the load and keeps the panel positioned. That is the point of a glass handling vacuum lifter. It supports glass orientation / positioning, shortens the alignment step, and lowers the chance of edge damage during final set.
In other words, the final result is not just faster work. It is fewer helpers, fewer panic stops, better control during rack-to-line transfer, and a safer answer to the one event everyone fears: sudden power loss while the pane is still in the air.
What to confirm before you specify the lifter
- Panel size, weight, and whether you need 800 kg or 1200 kg capacity. GLClamp has both classes, so you can match the load instead of guessing.
- Whether the job is glass storage rack pickup, A-frame rack to workstation transfer, or curtain wall installation. The pad layout and adjustable pad position should match the job path, not just the catalog.
- Whether your real risk is loss of vacuum or loss of power. If the answer is yes, power-off vacuum holding, non-return valve protection, and live pressure monitoring are not optional.
- Whether the crew needs rotation, tilt, and remote control for load positioning. A 360 degree rotating glass lifter solves the alignment step only when the operator can move the pane and read the pressure at the same time.